Liberty Pumps

Liberty Pumps :: G90 Elbow, 90 degree disch, C.I. w/ gasket & SS bolts (LSG,LSGX)

$ 28.70

KEY FEATURES:

GRINDER FLANGED ELBOW

90 DEGREE
FITS OMNIVORE LSG-SERIES GRINDER PUMPS
PROVIDES VERTICAL DISCHARGE FOR NON-GUIDE RAIL INSTALLATIONS

GENERAL DATA:

THE LIBERTY PUMPS G90 IS A FLANGED ELBOW (90 degree) FOR USE WITH THE LSG AND LSGX-SERIES GRINDER PUMPS.
THIS LIBERTY PUMP PART PROVIDES VERTICAL DISCHARGE FOR NON-GUIDE RAIL INSTALLATIONS.
THE LIBERTY PUMP G90 ALLOWS LSG-SERIES PUMPS TO CONNECT TO OTHER GUIDE RAIL DESIGNS.
THE LIBERTY G90 IS POWDER COATED FOR CORROSION RESISTANCE AND HAS A 1-1/4" FEMALE NPT OUTLET.

CONSTRUCTION/MATERIAL DATA:

FITS OMNIVORE LSG-SERIES GRINDER PUMPS
1-1/4" FEMALE NPT OUTLET
HEAVY CAST IRON CONSTRUCTION
POWDER COATED FOR CORROSION RESISTANCE
INCLUDES SEALING GROMMET AND STAINLESS STEEL BOLTS

Liberty Pumps :: Model 250 - Effluent pump, 1/3hp/115V, 10'cord,manual (no float switch)

$ 144.00

KEY FEATURES:

Rugged and dependable heavy-duty cast iron pump with powder coat finish.
Liberty's "workhorse" sump pump features a unique one-piece cast iron body, quick-disconnect power cord and three different switch options - including our Vertical Magnetic Float design (VMF) for smaller pits (model 257).
With a durable, epoxy powder coat finish and vortex style impeller, Liberty's 250-series pump is the perfect choice for low-head effluent pumping or basement de-watering.

GENERAL DATA:

MODEL: 250

HP:1/3

PHASE: 1

FULL LOAD AMPS: 5.2

LOCKED ROTOR AMPS: 8

THERMAL OVERLOAD TEMP: 105°C / 221°F

STATOR WINDING CLASS: B

DISCHARGE:1 1/2

AUTOMATIC:NO MANUAL

SOLIDS HANDLING SIZE:½”

PAINT: POWDER COAT

MAX LIQUID TEMP: 60°C 140°C

MAX STATOR TEMP: CLASS B 130°C/ 266°F

THERMAL OVERLOAD: 105°C / 221°F

ORINGS: BUNA N

WEIGHT: 23 LBS

CONSTRUCTION/MATERIAL DATA:

SHAFT: STAINLESS

HARDWARE: STAINLESS

IMPELLER: VORTEX ENGINEERED POLYMER

MOTOR HOUSING / VOLUTE: CLASS 25 CAST IRON

SEAL: ENGINEERED DOUBLE LIP SEAL WITH STAINLESS STEEL SPRINGS

ELECTRICAL/MOTOR DATA:

CORD LENGTH FT: 10

VOLTAGE: 115

POWER CORD TYPE: SJTW (10ft & 25ft models) SJTOOW (35ft & 50ft models)

Liberty Pumps :: Model 253 - Effluent pump, 1/3hp/115V, 10'cord, wide-angl w/plug

$ 221.00

KEY FEATURES:

Rugged and dependable heavy-duty cast iron pump with powder coat finish.
Liberty's "workhorse" sump pump features a unique one-piece cast iron body, quick-disconnect power cord and three different switch options - including our Vertical Magnetic Float design (VMF) for smaller pits (model 257).
With a durable, epoxy powder coat finish and vortex style impeller, Liberty's 250-series pump is the perfect choice for low-head effluent pumping or basement de-watering.

GENERAL DATA:

MODEL:253

HP:1/3

PHASE:1

FULL LOAD AMPS:5.2

LOCKED ROTOR AMPS:8

THERMAL OVERLOAD TEMP:105°C / 221°F

STATOR WINDING CLASS:B

DISCHARGE:1 1/2

AUTOMATIC:YES PIGGY BACK FLOAT

SOLIDS HANDLING SIZE:½”

PAINT:POWDER COAT

MAX LIQUID TEMP:60°C 140°C

MAX STATOR TEMP:CLASS B 130°C/ 266°F

THERMAL OVERLOAD:105°C / 221°F

ORINGS:BUNA N

WEIGHT:23 LBS

CONSTRUCTION/MATERIAL DATA:

SHAFT:STAINLESS

HARDWARE:STAINLESS

IMPELLER:VORTEX ENGINEERED POLYMER

MOTOR HOUSING /VOLUTE:CLASS 25 CAST IRON

SEAL:ENGINEERED DOUBLE LIP SEAL WITH STAINLESS STEEL SPRINGS

ELECTRICAL/MOTOR DATA:

CORD LENGTH FT:10

VOLTAGE:115

POWER CORD TYPE:SJTW (10ft & 25ft models) SJTOOW (35ft & 50ft models)

Liberty Pumps :: Model 253 - Effluent pump, 1/3hp/115V, 10'cord, wide-angl w/plug

Liberty Pumps :: Model 253-2 - Effluent pump, 1/3hp/115V, 25'cord, wide-angl w/plug

$ 247.00

KEY FEATURES:

Rugged and dependable heavy-duty cast iron pump with powder coat finish.
Liberty's "workhorse" sump pump features a unique one-piece cast iron body, quick-disconnect power cord and three different switch options - including our Vertical Magnetic Float design (VMF) for smaller pits (model 257).
With a durable, epoxy powder coat finish and vortex style impeller, Liberty's 250-series pump is the perfect choice for low-head effluent pumping or basement de-watering.

GENERAL DATA:

MODEL:253

HP:1/3

PHASE:1

FULL LOAD AMPS:5.2

LOCKED ROTOR AMPS:8

THERMAL OVERLOAD TEMP:105°C / 221°F

STATOR WINDING CLASS:B

DISCHARGE:1 1/2

AUTOMATIC:YES PIGGY BACK FLOAT

SOLIDS HANDLING SIZE:½”

PAINT:POWDER COAT

MAX LIQUID TEMP:60°C 140°C

MAX STATOR TEMP:CLASS B 130°C/ 266°F

THERMAL OVERLOAD:105°C / 221°F

ORINGS:BUNA N

WEIGHT:23 LBS

CONSTRUCTION/MATERIAL DATA:

SHAFT:STAINLESS

HARDWARE:STAINLESS

IMPELLER:VORTEX ENGINEERED POLYMER

MOTOR HOUSING /VOLUTE:CLASS 25 CAST IRON

SEAL:ENGINEERED DOUBLE LIP SEAL WITH STAINLESS STEEL SPRINGS

ELECTRICAL/MOTOR DATA:

CORD LENGTH FT:25'

VOLTAGE:115

POWER CORD TYPE:SJTW (10ft & 25ft models) SJTOOW (35ft & 50ft models)

Liberty Pumps :: Model 257 VMF - Effluent pump, 1/3hp/115V, 10'cord, vert.switch

$ 198.00

KEY FEATURES:

Rugged and dependable heavy-duty cast iron pump with powder coat finish.
Liberty's "workhorse" sump pump features a unique one-piece cast iron body, quick-disconnect power cord and three different switch options - including our Vertical Magnetic Float design (VMF) for smaller pits (model 257).
With a durable, epoxy powder coat finish and vortex style impeller, Liberty's 250-series pump is the perfect choice for low-head effluent pumping or basement de-watering.

GENERAL DATA:

MODEL:257

HP:1/3

PHASE:1

FULL LOAD AMPS:5.2

LOCKED ROTOR AMPS:8

THERMAL OVERLOAD TEMP:105˚C / 221°F

STATOR WINDING CLASS:B

DISCHARGE:1 1/2

AUTOMATIC:YES INTEGRAL VERTICLE FLOAT

SOLIDS HANDLING SIZE:½”

PAINT:POWDER COAT

MAX LIQUID TEMP:60˚C 140˚C

MAX STATOR TEMP:CLASS B 130˚C/ 266˚F

THERMAL OVERLOAD:105˚C / 221˚F

ORINGS:BUNA N

WEIGHT:23 LBS

CONSTRUCTION/MATERIAL DATA:

SHAFT:STAINLESS

HARDWARE:STAINLESS

IMPELLER:VORTEX ENGINEERED POLYMER

MOTOR HOUSING /VOLUTE:CLASS 25 CAST IRON

SEAL:ENGINEERED DOUBLE LIP SEAL WITH STAINLESS STEEL SPRINGS

ELECTRICAL/MOTOR DATA:

CORD LENGTH FT:10

VOLTAGE:115

POWER CORD TYPE:SJTW (10ft & 25ft models) SJTOOW (35ft & 50ft models)

Liberty Pumps :: Model 280-2 - Effluent pump, 1/2hp/115V, 25'cord, manual (no float switch)

$ 315.00

KEY FEATURES:

With a shut-off head of 37 feet and 3/4" solids-handling capability, the 280-Series by Liberty covers a wide-range of low-head to mid-range pump applications.
Designed for STEP systems, mound systems, liquid waste transfer and high output sump applications, you can count on the 280-Series to offer superior performance.
Designed with Liberty's unique one-piece cast iron body and quick-disconnect cords available in 10' and 25' lengths.
35' and 50' cords available on some models. See literature for specifics.
High-output 1/2 hp submersible with rugged cast iron housing.

GENERAL DATA:

MODEL:280

HP:1/2

PHASE:1

FULL LOAD AMPS:8.0

LOCKED ROTOR AMPS:23

THERMAL OVERLOAD TEMP:105˚C / 221°F

STATOR WINDING CLASS:B

CORD LENGTH FT:10

DISCHARGE:1 1/2

AUTOMATIC:NO MANUAL

SOLIDS HANDLING SIZE:¾”

PAINT:POWDER COAT

MAX LIQUID TEMP:60˚C/ 140˚F

MAX STATOR TEMP:CLASS B 130˚C/ 266˚F

THERMAL OVERLOAD:105˚C / 221°F

ORINGS:BUNA N

WEIGHT:30 LBS

CONSTRUCTION/MATERIAL DATA:

SHAFT:STAINLESS

HARDWARE:STAINLESS

IMPELLER:VORTEX ENGINEERED POLYMER

MOTOR HOUSING /VOLUTE:CLASS 25 CAST IRON

MECHANICAL SEAL:UNITIZED CERAMIC CARBON

ELECTRICAL/MOTOR DATA:

CORD LENGTH FT:10

VOLTAGE:115

POWER CORD TYPE:SJTW (10ft & 25ft models) SJTOOW (35ft & 50ft models)

Liberty Pumps :: Model 283 - Effluent Pump, 1/2hp/115v, 10'cord, wide-angl w/plug

$ 329.00

KEY FEATURES:

With a shut-off head of 37 feet and 3/4" solids-handling capability, the 280-Series by Liberty covers a wide-range of low-head to mid-range pump applications.
Designed for STEP systems, mound systems, liquid waste transfer and high output sump applications, you can count on the 280-Series to offer superior performance.
Designed with Liberty's unique one-piece cast iron body and quick-disconnect cords available in 10' and 25' lengths.
35' and 50' cords available on some models. See literature for specifics.
High-output 1/2 hp submersible with rugged cast iron housing.

GENERAL DATA:

MODEL:283

HP:1/2

PHASE:1

FULL LOAD AMPS:8.0

LOCKED ROTOR AMPS:23

THERMAL OVERLOAD TEMP:105˚C / 221°F

STATOR WINDING CLASS:B

CORD LENGTH FT:10

DISCHARGE:1 1/2

AUTOMATIC:YES PIGGY BACK FLOAT

SOLIDS HANDLING SIZE:¾”

PAINT:POWDER COAT

MAX LIQUID TEMP:60˚C/ 140˚F

MAX STATOR TEMP:CLASS B 130˚C/ 266˚F

THERMAL OVERLOAD:105˚C / 221°F

ORINGS:BUNA N

WEIGHT:30 LBS

CONSTRUCTION/MATERIAL DATA:

SHAFT:STAINLESS

HARDWARE:STAINLESS

IMPELLER:VORTEX ENGINEERED POLYMER

MOTOR HOUSING /VOLUTE:CLASS 25 CAST IRON

MECHANICAL SEAL:UNITIZED CERAMIC CARBON

ELECTRICAL/MOTOR DATA:

CORD LENGTH FT:10

VOLTAGE:115

POWER CORD TYPE:SJTW (10ft & 25ft models) SJTOOW (35ft & 50ft models)

Liberty Pumps :: Model 283HV-2 - Effluent Pump, 1/2hp/208-230V, 25'cord, wide-angl w/plug

$ 398.00

KEY FEATURES:

With a shut-off head of 37 feet and 3/4" solids-handling capability, the 280-Series by Liberty covers a wide-range of low-head to mid-range pump applications.
Designed for STEP systems, mound systems, liquid waste transfer and high output sump applications, you can count on the 280-Series to offer superior performance.
Designed with Liberty's unique one-piece cast iron body and quick-disconnect cords available in 10' and 25' lengths. 35' and 50' cords available on some models.
See literature for specifics. High-output 1/2 hp submersible with rugged cast iron housing.

GENERAL DATA:

MODEL:283HV

HP:1/2

PHASE:1

FULL LOAD AMPS:4.0

LOCKED ROTOR AMPS:12.5

THERMAL OVERLOAD TEMP:105˚C / 221°F

STATOR WINDING CLASS:B

DISCHARGE:1 1/2

AUTOMATIC:YES PIGGY BACK FLOAT

SOLIDS HANDLING SIZE:¾”

PAINT:POWDER COAT

MAX LIQUID TEMP:60˚C/ 140˚F

MAX STATOR TEMP:CLASS B 130˚C/ 266˚F

THERMAL OVERLOAD:105˚C / 221°F

ORINGS:BUNA N

WEIGHT:30 LBS

CONSTRUCTION/MATERIAL DATA:

SHAFT:STAINLESS

HARDWARE:STAINLESS

IMPELLER:VORTEX ENGINEERED POLYMER

MOTOR HOUSING/ VOLUTE:CLASS 25 CAST IRON

MECHANICAL SEAL:UNITIZED CERAMIC CARBON

ELECTRICAL/MOTOR DATA:

CORD LENGTH FT:10

VOLTAGE:208-230

POWER CORD TYPE:SJTW (10ft & 25ft models) SJTOOW (35ft & 50ft models)

Liberty Pumps :: Model FL61A-2 - Effluent pump, 6/10hp/115V, 25'cord, wide-angl w/plug

$ 868.00

KEY FEATURES:

The FL60-series by Liberty is a mid-range effluent pump designed for STEP systems, mound systems, liquid waste transfer and higher head de-watering applications.
Built of heavy cast iron with an epoxy powder coat finish and stainless steel fasteners, the FL60 will provide years of reliable performance.

GENERAL DATA:

MODEL:FL61A-2

HP:6/10

PHASE:1

FULL LOAD AMPS:13

LOCKED ROTOR AMPS:41

THERMAL OVERLOAD TEMP:135°C / 275°F

DISCHARGE:1 1/2

AUTOMATIC:YES

SOLIDS HANDLING SIZE:½”

PAINT:POWDER COAT

MAX LIQUID TEMP:60˚C 140˚C

MAX STATOR TEMP:135°C / 275°F

THERMAL OVERLOAD:135°C / 275°F

ORINGS:BUNA N

WEIGHT:57LBS

CONSTRUCTION/MATERIAL DATA:

SHAFT:STAINLESS

HARDWARE:STAINLESS

IMPELLER:MULTI-VANE CAST IRON

MOTOR HOUSING:CLASS 25 CAST IRON

VOLUTE:CLASS 25 CAST IRON

IMPELLER:CLASS 25 CAST IRON

MECHANICAL SEAL:UNITIZED CERAMIC CARBON

ELECTRICAL/MOTOR DATA:

CORD LENGTH FT:10

VOLTAGE:115

STATOR WINDING CLASS:B

POWER CORD TYPE:SJTW

Liberty Pumps :: Model LE102M2-2 - Sewage Ejector pump, 1hp/208-230V/1ph, 25'cord, manual

$ 837.00

KEY FEATURES:

Liberty's LE100-series is a 1 hp sewage pump with 2" solids-handling capability.
Constructed of heavy cast iron with a tough epoxy powder coat finish and stainless steel fasteners, the LE100 is designed for years of trouble-free performance.
Its quick-disconnect power cord allows for easy interchange and is available in 10', 25' and 35' lengths.
The LE100 can be ordered in 2" or 3" discharge configurations and a wide range of voltages.

GENERAL DATA:

MODEL:LE102M2-2

HP:1

PHASE:1

SF:1.00

FULL LOAD AMPS:8

LOCKED ROTOR AMPS:22.3

THERMAL OVERLOAD TEMP:105˚C 221°F

DISCHARGE:2" Flanged

AUTOMATIC:NO

SOLIDS HANDLING SIZE:2”

PAINT:POWDER COAT

MAX LIQUID TEMP:60˚C 140˚F

MAX STATOR TEMP:130˚C 266˚F

THERMAL OVERLOAD:105˚C 221˚F (single-phase only)

ORINGS:BUNA N

MIN BEARING LIFE:50,000 HRS

WEIGHT:64 LBS

CONSTRUCTION/MATERIAL DATA:

SHAFT:STAINLESS

HARDWARE:STAINLESS

IMPELLER:2 VANE CLASS 25 CAST IRON

MOTOR HOUSING:CLASS 25 CAST IRON

VOLUTE:CLASS 25 CAST IRON

MECHANICAL SEAL:UNITIZED CARBON CERAMIC-SINGLE PHASE UNITIZED SILICON CARBIDE-THREE PHASE

ELECTRICAL/MOTOR DATA:

VOLTAGE:208-230

CORD LENGTH FT:25

STATOR WINDING:B

POWER CORD TYPE:SJTW (1-PH) or SEOOW (3-PH)

Liberty Pumps :: Model LE41A - Sewage ejector pump, 4/10hp/115V, 10'cord, wide-angle w/plug

$ 408.00

KEY FEATURES:

Heavy-duty built and reliable, Liberty's LE40-series is the perfect choice for residential sewage applications.
Featuring all cast iron construction with an epoxy powder coat finish, stainless steel fasteners, quick-disconnect power cord and a vortex style impeller for superior solids handling, the LE40-series combines solid performance with exceptional value.
Vertical float option available on 115V model.

GENERAL DATA:

MODEL:LE41A

HP:4/10

PHASE:1

SF:1.00

FULL LOAD AMPS:12

LOCKED ROTOR AMPS:22.5

THERMAL OVERLOAD TEMP:105˚C 221°F

DISCHARGE:2"

AUTOMATIC:WIDE ANGLE

SOLIDS HANDLING SIZE:2”

PAINT:POWDER COAT

MAX LIQUID TEMP:60˚C 140˚F

MAX STATOR TEMP:130˚C 266˚F

THERMAL OVERLOAD:105˚C 221°F

ORINGS:BUNA N

WEIGHT:40 LBS

CONSTRUCTION/MATERIAL DATA:

SHAFT:STAINLESS

HARDWARE:STAINLESS

VOLUTE CLASS:25 CAST IRON

IMPELLER:MULTI-VANE ENGINEERED POLYMER

MOTOR HOUSING:CLASS 25 CAST IRON

MECHANICAL SEAL:UNITIZED CERAMIC CARBON

ELECTRICAL/MOTOR DATA:

VOLTAGE:115

CORD LENGTH FT:10

STATOR WINDING CLASS:B

POWER CORD TYPE:SJTW

Liberty Pumps :: Model LE41A-2 - Sewage ejector pump, 4/10hp/115V, 25'cord, wide-angle w/plug

$ 434.00

KEY FEATURES:

Heavy-duty built and reliable, Liberty's LE40-series is the perfect choice for residential sewage applications.
Featuring all cast iron construction with an epoxy powder coat finish, stainless steel fasteners, quick-disconnect power cord and a vortex style impeller for superior solids handling, the LE40-series combines solid performance with exceptional value.
Vertical float option available on 115V model.

GENERAL DATA:

MODEL:LE41A-2

HP:4/10

PHASE:1

SF:1.00

FULL LOAD AMPS:12

LOCKED ROTOR AMPS:22.5

THERMAL OVERLOAD TEMP:105˚C 221°F

DISCHARGE:2"

AUTOMATIC:WIDE ANGLE

SOLIDS HANDLING SIZE:2”

PAINT:POWDER COAT

MAX LIQUID TEMP:60˚C 140˚F

MAX STATOR TEMP:130˚C 266˚F

THERMAL OVERLOAD:105˚C 221°F

ORINGS:BUNA N

WEIGHT:40 LBS

CONSTRUCTION/MATERIAL DATA:

SHAFT:STAINLESS

HARDWARE:STAINLESS

VOLUTE:CLASS 25 CAST IRON

IMPELLER:MULTI-VANE ENGINEERED POLYMER

MOTOR HOUSING:CLASS 25 CAST IRON

MECHANICAL SEAL:UNITIZED CERAMIC CARBON

ELECTRICAL/MOTOR DATA:

VOLTAGE:115

CORD LENGTH FT:25

STATOR WINDING CLASS:B

POWER CORD TYPE:SJTW

Liberty Pumps :: Model LE51A-2 - Sewage ejector pump, 1/2hp/115V, 25'cord, wide-angle w/plug

$ 498.00

KEY FEATUERES:

Liberty's LE50-series cast iron sewage pump is a commercial-grade workhorse for residential and light commercial applications. Its efficient 1/2 hp motor with permanently lubricated bearings, stainless steel fasteners and quick-disconnect power cord design make this a favorite choice among professionals.
Other features include 2" solids-handling ability and a shut-off head of 25 feet. Optional vertical float switch model available in 115V.

GENERAL DATA:

MODEL:LE51A-2

HP:1/2

PHASE:1

SF:1.00

FULL LOAD AMPS:12

LOCKED ROTOR AMPS:22.5

THERMAL OVERLOAD TEMP:105˚C 221°F

DISCHARGE:2"

AUTOMATIC:WIDE ANGLE

IMPELLER:2 VANE ENGINEERED THERMOPLASTIC ELASTOMER 2” SOLIDS HANDLING

SOLIDS HANDLING SIZE:2”

PAIN:POWDER COAT

MAX LIQUID TEMP:60˚C 140˚F

MAX STATOR TEMP:130˚C 266˚F

THERMAL OVERLOAD:105˚C 221˚F

ORINGS:BUNA N

WEIGHT:43 LBS

CONSTRUCTION/MATERIAL DATA:

SHAFT:STAINLESS

HARDWARE:STAINLESS

VOLUTE:CLASS 25 CAST IRON

MOTOR HOUSING:CLASS 25 CAST IRON

MECHANICAL SEAL:UNITIZED CERAMIC CARBON

ELECTRICAL/MOTOR DATA:

VOLTAGE:115

CORD LENGTH FT:25

STATOR WINDING CLASS:B

POWER CORD TYPE:SJTW

Liberty Pumps :: Model LE51M-2 - Sewage ejector pump, 1/2hp/208-230V, 25'cord, non-automatic

$ 530.00

KEY FEATURES:

Liberty's LE50-series cast iron sewage pump is a commercial-grade workhorse for residential and light commercial applications.
Its efficient 1/2 hp motor with permanently lubricated bearings, stainless steel fasteners and quick-disconnect power cord design make this a favorite choice among professionals.
Other features include 2" solids-handling ability and a shut-off head of 25 feet.
Optional vertical float switch model available in 115V.

GENERAL DATA:

MODEL:LE51M-2

HP:1/2

PHASE:1

SF:1.00

FULL LOAD AMPS:12

LOCKED ROTOR AMPS:22.5

THERMAL OVERLOAD TEMP:105˚C 221°F

DISCHARGE:2"

AUTOMATIC:NO

SOLIDS HANDLING SIZE:2”

PAINT:POWDER COAT

MAX LIQUID TEMP:60˚C 140˚F

MAX STATOR TEMP:130˚C 266˚F

THERMAL OVERLOAD:105˚C 221˚F

ORINGS:BUNA N

WEIGHT:43 LBS

CONSTRUCTION/MATERIAL DATA:

SHAFT:STAINLESS

HARDWARE:STAINLESS

VOLUTE:CLASS 25 CAST IRON

MOTOR HOUSING:CLASS 25 CAST IRON

MECHANICAL SEAL:UNITIZED CERAMIC CARBON

IMPELLER:2 VANE ENGINEERED THERMOPLASTIC ELASTOMER 2” SOLIDS HANDLING

ELECTRICAL/MOTOR DATA:

VOLTAGE:115

CORD LENGTH FT:25

STATOR WINDING CLASS:B

POWER CORD TYPE:SJTW

Liberty Pumps :: Model LE71A2-2 - Sewage ejector pump, 3/4HP,115V,1Ph,wide-angle float, 25'Cord

$ 791.00

KEY FEATURES:

Liberty's LE70-series is a 3/4 hp sewage pump with 2" solids-handling capability.
Constructed of heavy cast iron with a tough epoxy powder coat finish, stainless steel fasteners and rotor shaft, the LE70 is designed for durability.
Its quick-disconnect cord design allows for easy interchange of power cords in 10', 25' and 35' lengths.
Available in 2" or 3" discharge configurations and a wide range of voltages.

GENERAL DATA:

MODEL:LE71A2-2

HP:3/4

PHASE:1

FULL LOAD AMPS:12

LOCKED ROTOR AMPS:29.1

THERMAL OVERLOAD TEMP:105˚C 221˚F

DISCHARGE:2"

AUTOMATIC:YES

SOLIDS HANDLING SIZE:2”

PAINT:POWDER COAT

MAX LIQUID TEMP:60˚C 140˚F

MAX STATOR TEMP:130˚C 266˚F

THERMAL OVERLOAD:105˚C 221˚F (single-phase only)

ORINGS:BUNA N

MIN BEARING LIFE:50,000 HRS

WEIGHT:62 LBS

CONSTRUCTION/MATERIAL DATA:

SHAFT:STAINLESS

HARDWARE:STAINLESS

VOLUTE CLASS:25 CAST IRON

MOTOR HOUSING:CLASS 25 CAST IRON

IMPELLER:2 VANE CLASS 25 CAST IRONv

MECHANICAL SEAL:UNITIZED CERAMIC CARBON

ELECTRICAL/MOTOR DATA:

VOLTAGE:115

CORD LENGTH FT:25

STATOR WINDING CLASS:B

POWER CORD TYPE:SJTW (1-PH) or SEOOW (3-PH)

Liberty Pumps :: Model LSG202-REX - Grinder Package, 208-230V/1ph, 2hp, Retro-Fit E/One

$ 2,473.00

KEY FEATURES:

The RE/REX-Series is engineered as an easy drop-in core replacement for E/One® GP200, GP2000 and Extreme D-Series systems. The newly upgraded design gives you all the power of Liberty’s Omnivore® grinder with patented V-Slice® cutter technology.

Choose from two performance levels – Liberty’s LSG single stage design with a maximum head of 108 feet or the LSGX 2-stage model with heads to 185 feet.

Improved features include an easily adjusted goose neck discharge, camlock cover system and highmount junction/control box that elevates it above the potential flood level in the event of a power failure. E/One® original equipment panels remain fully operational (including the manual over-ride switch) when connected to the Liberty unit.

GENERAL DATA:

MODEL:LSG202-REX

COVER: EPOXY POWDER COATED STEEL

MAX LIQUID TEMP: 140°F/ 60°C

MAX STATOR TEMP: 275°F/ 135°C

THERMAL OVERLOAD: 275°F/ 135°C

POWER CORD TYPE: SJOOW CORD WITH IP68 PANEL WITH TYPE TC CORD TO PRE-INSTALLED CONNECTOR FOR INTERFACE TO E-ONE® UNIT

WEIGHT: 117 LBS

CONSTRUCTION/MATERIAL DATA:

JUNCTION BOX: NEMA 4X

DISCHARGE ELBOW: 1-1/4” STAINLESS STEEL

DISCHARGE PIPING: STAINLESS STEEL

ANTI-SIPHON CHECK VALVE:HIGH TEMP NITRILE BALL POLYPROPYLENE FLOATING BALL HEAVY CAST IRON BODY

IMPELLER:300 SERIES S.S.

PAINT: POWDERCOATING

MOTOR HOUSING: CLASS 25 CAST IRON

VOLUTE: CLASS 25 CAST IRON

SHAFT: 300 SERIES S.S.

HARDWARE: STAINLESS

ORINGS: BUNA N

MECHANICAL SEAL: UNITIZED SILICON CARBIDE

MINIMUM BEARING LIFE: 50,000 HRS

ELECTRICAL/MOTOR DATA:

HP: 2

VOLTAGE: 208v-230v

PHASE: 1

SF: 1.0

FULL LOAD AMPS: 15

LOCKED ROTOR AMPS: 53

THERMAL OVERLOAD TEMP: 135°C

STATOR WINDING CLASS: B

CORD LENGTH FT: 10

DISCHARGE: 1-1/4” NPT

AUTOMATIC: YES

Liberty Pumps :: Model LSG202A - Grinder pump, 2hp/208-230V/1ph, single stage, wide-angle float w/plug, 25'cord

$ 1,438.00

LSG200-Series Omnivore®
2 hp Submersible Grinder Pumps
Features:

• 2 hp, heavy-duty motor – oil filled, thermally protected

• Upper and lower ball bearings

• One-piece uni-body cast iron housing

• 300 Series SS Rotor Shaft

• 316 Stainless steel impeller

• Dual seals – Upper seal is unitized durable silicon carbide. Lower seal is Viton® double-lip. (Lower seal ensures that all debris is kept away from main seal)

• Motor windings insulated to Class B (130˚C)

• Advanced V-Slice® cutting system made of hardened 440 stainless steel – Rockwell C 58

• Horizontal 1-1/4'' FNPT Discharge

• Back vanes on impeller and spiraled bottom plate for superior solids clearing

• All stainless steel fasteners • Clog-free volute design

• Designed for maximum heat dissipation and cool motor operating temperatures

• Solid state starting circuit - no mechanical relay coil

• 25' power cord with Quick-Disconnect

• Piggy back plug with wide angle float (on automatic model) eliminates need for expensive panel

^{Liberty's LSG200-Series Omnivore® grinder pumps meet the demanding needs of commercial and residential sewage applications where difficult solids-handling ability is crucial. The LSG200-Series features a superior cutting system made of hardened 440 stainless steel-Rockwell C 58, for shearing solids into small particles prior to being passed to the discharge by the impeller under high pressure. Applications include individual or groups of homes, motels, schools, shopping centers, lakefront developments and systems requiring high pressure sewage pumping. Whether you're replacing an existing grinder pump or customizing a new sewage system, the Omnivore® can be packaged within any number of tank sizes. (For a complete system please see the 2448LSG, 2484LSG, D3648, D3672 or consult Liberty for more information on a custom factory assembled system using the Omnivore®.)}

^{Features
The Omnivore® by Liberty is the industry's newest 2 hp grinder pump with new V-Slice® Cutter Technology. This new innovation provides more cuts per revolution for superior shredding performance in demanding sewage applications. The hardened stainless steel cutting system provides in excess of 300,000 cuts per minute and aggressively shreds jeans, shop rags, diapers, sanitary napkins and other difficult solids into a fine slurry. A unique open volute design eliminates the cutwater - improving solids flow and reducing potential jamming of material in the volute. Other features include a one-piece cast iron body, quick-disconnect power cord, stainless steel impeller and dual shaft seals. Capacitors are integral to the pump, eliminating the need for an expensive control panel. Complete pre-assembled grinder systems are available and backed by Liberty's 3 year limited warranty.}

Liberty Pumps :: Model LSG202M - Grinder pump, 2hp/208-230V/1ph, single stage, manual (no float switch), 25'cord

$ 1,388.00

2 hp Submersible Grinder Pumps

KEY FEATURES:

• 2 hp, heavy-duty motor – oil filled, thermally protected

• Upper and lower ball bearings

• One-piece uni-body cast iron housing

• 300 Series SS Rotor Shaft

• 316 Stainless steel impeller

• Dual seals – Upper seal is unitized durable silicon carbide. Lower seal is Viton® double-lip. (Lower seal ensures that all debris is kept away from main seal)

• Motor windings insulated to Class B (130˚C)

• Advanced V-Slice® cutting system made of hardened 440 stainless steel – Rockwell C 58

• Horizontal 1-1/4'' FNPT Discharge

• Back vanes on impeller and spiraled bottom plate for superior solids clearing

• All stainless steel fasteners • Clog-free volute design

• Designed for maximum heat dissipation and cool motor operating temperatures

• Solid state starting circuit - no mechanical relay coil

• 25' power cord with Quick-Disconnect

• Piggy back plug with wide angle float (on automatic model) eliminates need for expensive panel

^{GENERAL DATA:}

^{Liberty's LSG200-Series Omnivore® grinder pumps meet the demanding needs of commercial and residential sewage applications where difficult solids-handling ability is crucial. The LSG200-Series features a superior cutting system made of hardened 440 stainless steel-Rockwell C 58, for shearing solids into small particles prior to being passed to the discharge by the impeller under high pressure. Applications include individual or groups of homes, motels, schools, shopping centers, lakefront developments and systems requiring high pressure sewage pumping. Whether you're replacing an existing grinder pump or customizing a new sewage system, the Omnivore® can be packaged within any number of tank sizes. (For a complete system please see the 2448LSG, 2484LSG, D3648, D3672 or consult Liberty for more information on a custom factory assembled system using the Omnivore®.)}

^{KEY FEATURES:}

The Omnivore® by Liberty is the industry's newest 2 hp grinder pump with new V-Slice® Cutter Technology. This new innovation provides more cuts per revolution for superior shredding performance in demanding sewage applications.
The hardened stainless steel cutting system provides in excess of 300,000 cuts per minute and aggressively shreds jeans, shop rags, diapers, sanitary napkins and other difficult solids into a fine slurry. A unique open volute design eliminates the cutwater - improving solids flow and reducing potential jamming of material in the volute.
Other features include a one-piece cast iron body, quick-disconnect power cord, stainless steel impeller and dual shaft seals. Capacitors are integral to the pump, eliminating the need for an expensive control panel. Complete pre-assembled grinder systems are available and backed by Liberty's 3 year limited warranty.

CONSTRUCTION / MATERIAL DATA:

MOTOR: HEAVY-DUTY MOTOR- OIL FILLED, THERMALLY PROTECTED

STEEL: ADVANCED V-SLICE CUTTING SYSTEM MADE OF HARDENED 440 STAINLESS STEEL - ROCKWELL C 58

CAPACITOR:INTERNAL

BEARINGS: UPPER AND LOWER BALL

HOUSING: ONE-PIECE UNI-BODY CAST IRON

SHAFT: 300 SERIES SS ROTOR

IMPELLER: 316 STAINLESS STEEL

SEAL: DUAL SEALS - UPPER SEAL IS UNITIZED DURABLE SILICON CARBIDE. LOWER SEAL IS VITON DOUBLE-LIP. (LOWER SEAL ENSURES THAT ALL DEBRIS IS KEPT AWAY FROM MAIN SEAL)

CUTTER: NEW PATENTED V-SLICE CUTTER TECHNOLOGY

DISCHARGE: HORIZONTAL 1-1/4" FNPT DISCHARGE

VANES: BACK VANES ON IMPELLER AND SPIRALED BOTTOM PLATE FOR SUPERIOR SOLIDS CLEARING

FASTENER: All STAINLESS STEEL

ELECTRICAL/MOTOR DATA:

CORD: 25' POWER CORD WITH QUICK-DISCONNECT

HORSE POWER: 2

TYPE: MANUAL

VOLTAGE: 208v-230v

SHUTOFF HEAD (FT.): 108 FT.

DISCHARGE: 1-1/4" FNPT 1-1/4"

CIRCUIT/COIL: SOLID STATE STARTING CIRCUIT - NO MECHANILAL RELAY COIL

MOTOR WINDINGS: INSULATED TO CLASS B (265°F)

Liberty Pumps :: Model LSG202M-C - Grinder pump, 2HP, 208-230V, 1PH, cap-less, manual (no float switch),35'cord

$ 1,325.50

LSG200-Series Omnivore®
2 hp Submersible

2 hp.
1 1/4" Discharge

GENERAL DATA:

Liberty's LSG200-Series Omnivore® meet the demanding needs of commercial and residential applications where difficult solids-handling ability is crucial.
The LSG200-Series features a superior cutting system made of hardened 440 stainless steel-Rockwell C 58, for shearing solids into small particles prior to being passed to the discharge by the impeller under pressure. Applications include individual or groups of homes, motels, schools, shopping centers, lakefront developments and systems requiring pressure pumping.
Whether you're replacing an existing or customizing a new system, the Omnivore® can be packaged within any number of tank sizes. (For a complete system please see the 2448LSG, 2484LSG, D3648, D3672 or consult Liberty for more information on a custom factory assembled system using the Omnivore®.)

^{KEY FEATURES:}

The Omnivore® by Liberty is the industry's newest 2 hp with new V-Slice® Cutter Technology. This new innovation provides more cuts per revolution for superior shredding performance in demanding applications.
The hardened stainless steel cutting system provides in excess of 300,000 cuts per minute and aggressively shreds jeans, shop rags, diapers, sanitary napkins and other difficult solids into a fine slurry. A unique open volute design eliminates the cutwater - improving solids flow and reducing potential jamming of material in the volute.
Other features include a one-piece cast iron body, quick-disconnect power cord, stainless steel impeller and dual shaft seals. Capacitors are integral to the , eliminating the need for an expensive control panel. Complete pre-assembled systems are available and backed by Liberty's 3 year limited warranty.

CONSTRUCTION / MATERIAL DATA:

MOTOR: HEAVY DUTY MOTOR - OIL FILLED, THERMALLY PROTECTED

ADVANCED V-SLICE CUTTING SYSTEM : MADE OF HARDENED 440 STAINLESS STEEL - ROCKWELL C 58

CAPACITOR: EXTERNAL CAPACITORS, REQUIRING A PANEL WITH APPROPRIATELY SIZED START AND RUN CAPACITORS

BEARING: UPPER AND LOWER BALL

HOUSING: ONE-PIECE UNI-BODY CAST IRON

SHAFT: 300 SERIES SS ROTOR

IMPELLER: 316 STAINLESS STEEL

DUAL SEALS : - UPPER SEAL IS UNITIZED DURABLE SILICON CARBIDE. LOWER SEAL IS VITON DOUBLE-LIP. (LOWER SEAL ENSURES THAT ALL DEBRIS IS KEPT AWAY FROM MAIN SEAL)

CUTTER: NEW PATENTED V-SLICE CUTTER TECHNOLOGY

DISCHARGE: HORIZONTAL 1-1/4" FNPT

VANES: BACK VANES ON IMPELLER AND SPIRALLLED BOTTOM PLATE FOR SUPERION SOLIDS CLEARING

FASTENERS: ALL STAINLESS STEEL

VOLUTE DESIGN: CLOG-FREE

CIRCUIT/COIL: SOLID STATE STARTING CIRCUIT - NO MECHANICAL RELAY COIL

CORD LENGTH: 35' POWER CORD WITH QUICK-DISCONNECT

ELECTRICAL/MOTOR DATA:

HORSE POWER: 2HP

SHUT-OFF HEAD: 108'

VOLTAGE: 208V-230V

PHASE: 1

SPEED: 3450 RPM

MOTOR FACTOR: 1.0

FULL LOAD AMPERS: 15

LOCKED ROTOR AMPERS: 53

STARTING CIRCUIT: PANEL

MAXIMUM FLUID TEMPERATURE (INTERMITTENT): 140°F

MAXIMUM FLUID TEMPERATURE (CONTINOUS): 104°F

THERMALLY PROTECTED: YES

STATOR WINDING CLASS: B

MOTOR WINDINGS: INSULATED TO CLASS B (265°F)

CORD LENGTH: 35'

DISCHARGE: 1-1/4" NPT FLANGED

WEIGHT: 86 LBS.

Liberty Pumps :: Model LSG203M - Grinder pump, 2hp/208-230V/3phase, manual (no float switch) , 25'cord

$ 1,363.60

LSG200-Series Omnivore®
2 hp Submersible Grinder Pumps

KEY FEATURES:

• 2 hp, heavy-duty motor – oil filled, thermally protected

• Upper and lower ball bearings

• One-piece uni-body cast iron housing

• 300 Series SS Rotor Shaft

• 316 Stainless steel impeller

• Dual seals – Upper seal is unitized durable silicon carbide. Lower seal is Viton® double-lip. (Lower seal ensures that all debris is kept away from main seal)

• Motor windings insulated to Class B (130˚C)

• Advanced V-Slice® cutting system made of hardened 440 stainless steel – Rockwell C 58

• Horizontal 1-1/4'' FNPT Discharge

• Back vanes on impeller and spiraled bottom plate for superior solids clearing

• All stainless steel fasteners • Clog-free volute design

• Designed for maximum heat dissipation and cool motor operating temperatures

• Solid state starting circuit - no mechanical relay coil

• 25' power cord with Quick-Disconnect

• Piggy back plug with wide angle float (on automatic model) eliminates need for expensive panel

^{GENERAL DATA:}

Liberty's LSG200-Series Omnivore® grinder pumps meet the demanding needs of commercial and residential sewage applications where difficult solids-handling ability is crucial.
The LSG200-Series features a superior cutting system made of hardened 440 stainless steel-Rockwell C 58, for shearing solids into small particles prior to being passed to the discharge by the impeller under high pressure. Applications include individual or groups of homes, motels, schools, shopping centers, lakefront developments and systems requiring high pressure sewage pumping.
Whether you're replacing an existing grinder pump or customizing a new sewage system, the Omnivore® can be packaged within any number of tank sizes. (For a complete system please see the 2448LSG, 2484LSG, D3648, D3672 or consult Liberty for more information on a custom factory assembled system using the Omnivore®.)

^Features

The Omnivore® by Liberty is the industry's newest 2 hp grinder pump with new V-Slice® Cutter Technology. This new innovation provides more cuts per revolution for superior shredding performance in demanding sewage applications.
The hardened stainless steel cutting system provides in excess of 300,000 cuts per minute and aggressively shreds jeans, shop rags, diapers, sanitary napkins and other difficult solids into a fine slurry. A unique open volute design eliminates the cutwater - improving solids flow and reducing potential jamming of material in the volute.
Other features include a one-piece cast iron body, quick-disconnect power cord, stainless steel impeller and dual shaft seals. Capacitors are integral to the pump, eliminating the need for an expensive control panel. Complete pre-assembled grinder systems are available and backed by Liberty's 3 year limited warranty.

CONSTRUCTION / MATERIAL DATA:

HORSE POWER: 2HP, HEAVY-DUTY MOTOR - OIL FILLED

ADVANCED V-SLICE CUTTING SYSTEM: MADE OF HARDENED 440 STAINLESS STEEL - ROCKWELL C 58

CAPACITOR: INTERNAL

BEARING: UPPER AND LOWER BALL

HOUSING: ONE-PIECE UNI-BODY CAST IRON

SHAFT: 300 SERIES SS ROTOR

IMPELLER: 316 STAINLESS STEEL

DUAL SEALS: - UPPER SEAL IS UNITIZED DURABLE SILICON CARBIDE. LOWER SEAL IS VITON DOUBLE-LIP. (LOWER SEAL ENSURES THAT ALL DEBRIS IS KEPT AWAY FROM MAIN SEAL)

MOTOR WINDINGS: INSULATED TO CLASS B (265°F)

CUTTER: NEW PATENTED V-SLICE CUTTER TECHNOLOGY

DISCHARGE: HORIZONTAL 1-1/4" FNPT

BACK VANES ON IMPELLER AND SPIRALED BOTTOM PLATE FOR SUPERIOR SOLIDS CLEARING

FASTENER: ALL STAINLESS STEEL

VOLUTE DESIGN: CLOG-FREE

DESIGNED FOR MAXIMUM HEAT DISSIPATION AND COOL MOTOR OPERATING TEMPERATURES

ELECTRICAL/MOTOR DATA:

HORSEPOWER: 2HP

SHUT-OFF HEAD: 108'

VOLTAGE: 208V-230V

PHASE: 3

SPEED: 3450 RPM

MOTOR SERVICE FACTOR: 1.0

FULL LOAD AMPERS: 10.6

LOCKED ROTOR AMPERS: 62

STARTING CIRCUIT: N/A

MAXIMUM FLUID TEMPERATURE (INTERMITTENT): 140°F

MAXIMUM FLUID TEMPERATURE (CONTINUOUS): 104°F

THERMALLY PROTECTED: NO

STATOR WINDING CLASS: B

DISCHARGED: 1-1/4" NPT FLANGED

CIRCUIT / COIL: SOLID STATE STARTING CIRCUIT - NO MECHANICAL RELAY COIL

CORD: 25' POWER CORD WITH QUICK-DISCONNECT

WEIGHT: 86 LBS.

Liberty Pumps :: Model LSG204M - Grinder pump, 2hp/440-460V/3phase, manual (no float switch), 25'cord

$ 1,498.00

KEY FEATURES:

2 hp Submersible Grinder Pumps

• 2 hp, heavy-duty motor – oil filled, thermally protected

• Upper and lower ball bearings

• One-piece uni-body cast iron housing

• 300 Series SS Rotor Shaft

• 316 Stainless steel impeller

• Dual seals – Upper seal is unitized durable silicon carbide. Lower seal is Viton® double-lip. (Lower seal ensures that all debris is kept away from main seal)

• Motor windings insulated to Class B (130˚C)

• Advanced V-Slice® cutting system made of hardened 440 stainless steel – Rockwell C 58

• Horizontal 1-1/4'' FNPT Discharge

• Back vanes on impeller and spiraled bottom plate for superior solids clearing

• All stainless steel fasteners • Clog-free volute design

• Designed for maximum heat dissipation and cool motor operating temperatures

• Solid state starting circuit - no mechanical relay coil

• 25' power cord with Quick-Disconnect

• Piggy back plug with wide angle float (on automatic model) eliminates need for expensive panel

Liberty's LSG200-Series Omnivore® grinder pumps meet the demanding needs of commercial and residential sewage applications where difficult solids-handling ability is crucial.
The LSG200-Series features a superior cutting system made of hardened 440 stainless steel-Rockwell C 58, for shearing solids into small particles prior to being passed to the discharge by the impeller under high pressure. Applications include individual or groups of homes, motels, schools, shopping centers, lakefront developments and systems requiring high pressure sewage pumping.
Whether you're replacing an existing grinder pump or customizing a new sewage system, the Omnivore® can be packaged within any number of tank sizes. (For a complete system please see the 2448LSG, 2484LSG, D3648, D3672 or consult Liberty for more information on a custom factory assembled system using the Omnivore®.)

^Features

The Omnivore® by Liberty is the industry's newest 2 hp grinder pump with new V-Slice® Cutter Technology. This new innovation provides more cuts per revolution for superior shredding performance in demanding sewage applications.
The hardened stainless steel cutting system provides in excess of 300,000 cuts per minute and aggressively shreds jeans, shop rags, diapers, sanitary napkins and other difficult solids into a fine slurry. A unique open volute design eliminates the cutwater - improving solids flow and reducing potential jamming of material in the volute.
Other features include a one-piece cast iron body, quick-disconnect power cord, stainless steel impeller and dual shaft seals. Capacitors are integral to the pump, eliminating the need for an expensive control panel. Complete pre-assembled grinder systems are available and backed by Liberty's 3 year limited warranty.

GENERAL DATA:

CONSTRUCTION / MATERIAL DATA:

HORSEPOWER: 2HP, HEAVY-DUTY MOTOR - OIL FILLED

ADVANCED V-SLICE CUTTING SYSTEM: MADE OF HARDENED 440 STAINLESS STELL - ROCKWELL C 58

CAPACITOR: INTERNAL

BEARING: UPPER AND LOWER BALL

HOUSING: ONE-PIECE UNI-BODY CAST IRON

SHAFT: 300 SERIES SS ROTOR

IMPELLLER: 316 STAINLESS STEEL

DUAL SEALS: - UPPER SEAL IS UNITIZED DURABLE SILICON CARBIDE. LOWER SEAL IS VITON DOUBLE-LIP. (LOWER SEAL ENSURES THAT ALL DEBIS IS KEPT AWAY FROM MAIN SEAL)

MOTOR WINDINGS: INSULATED TO CLASS B (265°F)

CUTTER: NEW PATENTED V-SLICE CUTTER TECHNOLOGY

DISCHARGE: HORIZONTAL 1-1/4" FNPT

VANES: BACK VANES ON IMPELLER AND SPIRALED BOTTOM PLATE FOR SUPERIOR SOLIDS CLEARING

FASTENER: ALL STAINLESS STEEL

VOLUTE DESIGN: CLOG-FREE

DESIGNED FOR MAXIMUM HEAT DISSIPATION AND COOL MOTOR OPERATING TEMPERATURES

CIRCUIT/COIL: SOLID STATE STARTING CIRCUIT - NO MECHANICAL RELAY COIL

CORD: 25' POWER CORD WITH QUICK-DISCONNECT

WEIGHT: 86 LBS.

ELECTRICAL/MOTOR DATA:

HORSEPOWER: 2HP

SHUT-OFF HEAD: 108'

VOLTAGE: 440V-460V

PHASE: 3

SPEED: 3450 RPM

MOTOR SERVICE FACTOR: 1.0

FULL LOAD AMPERS: 5.3

LOCKED ROTOR AMPERS: 31

STARTING CIRCUIT: N/A

MAXIMUM FLUID TEMPERATURE (INTERMITTENT): 140°F

MAXIMUM FLUID TEMPERATURE (CONTINUOUS): 104°F

THERMALLY PROTECTED: NO

STATOR WINDING CLASS: B

CORD LENGTH: 25'

DISCHARGE: 1-1/4" NPT FLANGED

Liberty Pumps :: Model LSGX202-REX - Grinder Package, 208-230V/1ph, 2hp(2-stg), Retro-Fit E/One

$ 2,985.00

KEY FEATURES:

The RE/REX-Series is engineered as an easy drop-in core replacement for E/One® GP200, GP2000 and Extreme D-Series systems. The newly upgraded design gives you all the power of Liberty’s Omnivore® grinder with patented V-Slice® cutter technology.
Choose from two performance levels – Liberty’s LSG single stage design with a maximum head of 108 feet or the LSGX 2-stage model with heads to 185 feet.
Improved features include an easily adjusted goose neck discharge, camlock cover system and high mount junction/control box that elevates it above the potential flood level in the event of a power failure. E/One® original equipment panels remain fully operational (including the manual over-ride switch) when connected to the Liberty unit.

Liberty Pumps :: Model LSGX202-REX - Grinder Package, 208-230V/1ph, 2hp(2-stg), Retro-Fit E/One

GENERAL DATA:

MODEL:LSGX202-REX

WEIGHT: 117 LBS

MINIMUM BEARING LIFE: 50,000 HRS

MAX LIQUID TEMP: 140°F/ 60°C

MAX STATOR TEMP: 275°F/ 135°C

THERMAL OVERLOAD: 275°F/ 135°C

FULL LOAD AMPS:15

LOCKED ROTOR AMPS:53

THERMAL OVERLOAD TEMP:135°C

STATOR WINDING CLASS:B

CORD LENGTH FT:10

DISCHARGE:1-1/4” NPT

AUTOMATIC:YES

CONSTRUCTION/MATERIAL DATA:

JUNCTION BOX: NEMA 4X

DISCHARGE ELBOW: 1-1/4” STAINLESS STEEL

DISCHARGE PIPING: STAINLESS STEEL

ANTI-SIPHON CHECK VALVE: HIGH TEMP NITRILE BALL POLYPROPYLENE FLOATING BALL HEAVY CAST IRON BODY

IMPELLER: 300 SERIES S.S.

PAINT: POWDERCOATING

POWER CORD TYPE: SJOOW CORD WITH IP68 PANEL WITH TYPE TC CORD TO PRE-INSTALLED CONNECTOR FOR INTERFACE TO E-ONE® UNIT

MOTOR HOUSING: CLASS 25 CAST IRON

VOLUTE: CLASS 25 CAST IRON

SHAFT: 300 SERIES S.S.

HARDWARE: STAINLESS

ORINGS: BUNA N

MECHANICAL SEAL: UNITIZED SILICON CARBIDE

COVER: EPOXY POWDER COATED STEEL

ELECTRICAL/MOTOR DATA:

HP: 2

VOLTAGE: 208-230

PHASE: 1

SF:1.0

Liberty Pumps :: Model LSGX202A - Grinder pump, 2hp/208-230V/1ph, 2-stg.,wide-angl w/plug

$ 1,902.60

KEY FEATURES:
2 hp 2-Stage High Head Grinder

2 hp.
1 1/4" Discharge

Liberty's 2-stage LSGX-Series Omnivore® grinder pumps meet the demanding needs of commercial and residential sewage applications where difficult solids-handling ability is crucial.
The LSGX features a superior cutting system made of hardened 440 stainless steel-Rockwell C 58, for shearing solids into small particles prior to being passed to the discharge. The 2 stage design provides high pressure with maximum head capabilities to 185 feet.
This performance allows installation of a centrifugal designed grinder where only progressive cavity style designs were previously used. Applications include individual or groups of homes, motels, schools, shopping centers, lakefront developments and systems requiring high pressure sewage pumping.
Whether you're replacing an existing grinder pump or customizing a new sewage system, the Omnivore® can be packaged within any number of tank sizes. (For a complete system please see the 2448LSG, 2484LSG, D3648, D3672 or consult Liberty for more information on a custom factory assembled system using the Omnivore®.)

Features

The LSGX Omnivore® 2-Stage grinder pump features patented V-Slice® Cutter Technology. This new innovation provides more cuts per revolution for superior shredding performance in demanding sewage applications.
The hardened stainless steel cutting system provides in excess of 370,000 cuts per minute and aggressively shreds jeans, shop rags, diapers, sanitary napkins and other difficult solids into a fine slurry. A unique open volute design eliminates the cutwater - improving solids flow and reducing potential jamming of material in the volute.
Other features include a one-piece cast iron body, quick-disconnect power cord, twin stainless steel impellers and dual shaft seals. Capacitors are integral to the pump, eliminating the need for an expensive control panel. Complete pre-assembled grinder systems are available and backed by Liberty's 3 year limited warranty.

CONSTRUCTION / MATERIAL DATA:

HORSEPOWER: 2HP, HEAVY-DUTY MOTOR - OIL FILLED, THERMALLY PROTECTED

STAGE: OMNIVORE LSGX-SERIES 2-STAGE

ADVANCED V-SLICE CUTTING SYSTEM: MADE OF HARDENED 440 STAINLESS STEEL - ROCKWELL C 58

BODY: ONE-PIECE CAST IRON

ENTIRE CUTTING SYSTEM: MADE OF 440 STAINLESS STEEL HARDENED TO 58 RC

V-PATTERN: PROVIDES UP TO 108 ALTERNATED CUTS PER REVOLUTION

DISCHARGE: HORIZONTAL 1-1/4" FNPT DISCHARGE

SUPERIOR PUMP DESIGN: ALLOWS FOR EFFICIENT PUMPING OVER A WIDE RANGE OF HEAD APPLICATIONS - EVEN NEGATIVE HEAD

RELIABILITY: UNSURPASSED RELIABILITY REDUCES MAINTENANCE AND HOMEOWNER INCONVENIENCE

CAPACITOR: INTERNAL

BEARING: UPPER AND LOWER BALL

HOUSING: ONE-PIECE UNI-BODY CAST IRON

SHAFT: 300 SERIES SS ROTOR

IMPELLER: 316 STAINLESS STEEL

DUAL SEALS: - UPPER SEAL IS UNITIZED DURABLE SILICON CARBIDE. LOWER SEAL IS VITON DOUBLE-LIP. (LOWER SEAL ENSURES THAT ALL DEBRIS IS KEPT AWAY FROM MAIN SEAL)

MOTOR WINDINGS: INSULATED TO CLASS B (265°F)

CUTTER: NEW PATENTED V-SLICE CUTTER TECHNOLOGY

VANES:BACK VANES ON IMPELLER AND SPIRALED BOTTOM PLATE FOR SUPERIOR SOLIDS CLEARING

FASTENER: ALL STAINLESS STEEL

VOLUTE DESIGN: CLOG-FREE

DESIGNED FOR MAXIMUM HEAT DISSIPATION AND COOL MOTOR OPERATING TEMPERATURES

CIRCUIT/COIL: SOLID STATE STARTING CIRCUIT - NO MECHANICAL RELAY COIL

CORD: 25' POWER CORD WITH QUICK-DISCONNECT

PLUG: PIGGY-BACK PLUG WITH WIDE ANGLE FLOAT ELIMINATES NEED FOR EXPENSIVE PANEL

WEIGHT: 92 LBS.

ELECTRICAL/MOTOR DATA:

HORSEPOWER: 2HP

SHUT-OFF HEAD: 184'

VOLTAGE: 208V-230V

PHASE: 1

SPEED: 3450 RPM

MOTOR SERVICE FACTOR: 1.0

FULL LOAD AMPERS: 15

LOCKED ROTOR AMPERS: 53

STARTING CIRCUIT: SOLID STATE

MAXIMUM FLUID TEMPERATURE (INTERMITTENT): 140°F

MAXIMUM FLUID TEMPERATURE (CONTINUOUS): 104°F

THERMALLY PROTECTED: YES

STATOR WINDING CLASS: B

CORD LENGTH: 25'

DISCHARGE: 1-1/4" NPT Flanged

Liberty LSGX202A Dual Stage Grinder Pump

Liberty LSGX202A Dual Stage Grinder Pump Curve

Liberty Pumps :: Model LSGX202M-C - Grinder pump, 2hp/208-230V/1ph, 2-stage,cap-less, 35'cord - Manual (no float switch)

$ 1,931.00

KEY FEATURES:
2 hp 2-Stage High Head Grinder

2 hp.
1 1/4" Discharge

Liberty's 2-stage LSGX-Series Omnivore® grinder pumps meet the demanding needs of commercial and residential sewage applications where difficult solids-handling ability is crucial. The LSGX features a superior cutting system made of hardened 440 stainless steel-Rockwell C 58, for shearing solids into small particles prior to being passed to the discharge.
The 2 stage design provides high pressure with maximum head capabilities to 185 feet. This performance allows installation of a centrifugal designed grinder where only progressive cavity style designs were previously used. Applications include individual or groups of homes, motels, schools, shopping centers, lakefront developments and systems requiring high pressure sewage pumping.
Whether you're replacing an existing grinder pump or customizing a new sewage system, the Omnivore® can be packaged within any number of tank sizes. (For a complete system please see the 2448LSG, 2484LSG, D3648, D3672 or consult Liberty for more information on a custom factory assembled system using the Omnivore®.)

Features

The LSGX Omnivore® 2-Stage grinder pump features patented V-Slice® Cutter Technology. This new innovation provides more cuts per revolution for superior shredding performance in demanding sewage applications.
The hardened stainless steel cutting system provides in excess of 370,000 cuts per minute and aggressively shreds jeans, shop rags, diapers, sanitary napkins and other difficult solids into a fine slurry. A unique open volute design eliminates the cutwater - improving solids flow and reducing potential jamming of material in the volute.
Other features include a one-piece cast iron body, quick-disconnect power cord, twin stainless steel impellers and dual shaft seals. Capacitors are integral to the pump, eliminating the need for an expensive control panel. Complete pre-assembled grinder systems are available and backed by Liberty's 3 year limited warranty.

GENERAL DATA:

HORSEPOWER: 2HP, HEAVY-DUTY MOTOR - OIL FILLED, THERMALLY PROTECTED

STAGE: OMNIVORE LSGX-SERIES 2-STAGE

ADVANCED V-SLICE CUTTING SYSTEM: MADE OF HARDENED 440 STAINLESS STEEL - ROCKWELL C 58

BODY: ONE-PIECE CAST IRON

ENTIRE CUTTING SYSTEM: MADE OF 440 STAINLESS STEEL HARDENED TO 58 RC

V-PATTERN: PROVIDES UP TO 108 ALTERNATED CUTS PER REVOLUTION

DISCHARGE: HORIZONTAL 1-1/4" FNPT DISCHARGE

SUPERIOR PUMP DESIGN: ALLOWS FOR EFFICIENT PUMPING OVER A WIDE RANGE OF HEAD APPPLICATIONS - EVEN NEGATIVE HEAD

UNSUPASSED RELIABILITY: REDUCES MAINTENANCE AND HOMEOWNER INCONVENIENCE

EXTERNAL CAPACITORS: REQUIRING A PANEL WITH APPROPRIATELY SIZED START AND RUN CAPACITORS

BEARING: UPPER AND LOWER BALL

HOUSING: ONE-PIECE UNI-BODY CAST IRON

SHAFT: 300 SERIES SS ROTOR

IMPELLER: 316 STAINLESS STEEL

DUAL SEALS: UPPER SEAL IS UNITIZED DURABLE SILICON CARBIDE. LOWER SEAL IS VITON DOUBLE-LIP. (LOWER SEAL ENSURES THAT ALL DEBRIS IS KEPT AWAY FROM MAIN SEAL)

MOTOR WINDINGS: INSULATED TO CLASS B (265°F)

CUTTER: NEW PATENTED V-SLICE CUTTER TECHNOLOGY

VANES: BACK VANES ON IMPELLER AND SPIRALED BOTTOM PLATE FOR SUPERIOR SOLIDS CLEARING

FASTENER: ALL STAINLESS STEEL

VOLUTE DESIGN: CLOG-FREE

DESIGNED FOR MAXIMUM HEAT DISSIPATION AND COOL MOTOR OPERATING TEMPERATURES

CIRCUIT/COIL: SOLID STATE STARTING CIRCUIT - NO MECHANICAL RELAY COIL

CORD: 35' POWER CORD WITH QUICK-DISCONNECT

WEIGHT: 97 LBS.

ELECTRICAL/MOTOR DATA:

HORSEPOWER: 2HP

SHUT-OFF HEAD: 184'

VOLTAGE: 208-230V

PHASE: 1

SPEED: 3450 RPM

MOTOR SERVICE FACTOR: 1.0

FULL LOAD AMPERS: 15

LOCKED ROTOR AMPERS: 53

STARTING CIRCUIT: PANEL

MAXIMUM FLUID TEMPERATURE (INTERMITTENT): 140°F

MAXIMUM FLUID TEMPERATURE (CONTINUOUS): 104°F

THERMALLY PROTECTED: YES

STATOR WINDING CLASS: B

CORD LENGTH: 35'

DISCHARGE: 1-1/4" NPT FLANGED

Liberty LSGX202M-C Dual Stage Grinder Pump

Liberty LSGX202M-C Dual Stage Grinder Pump Curve

Liberty Pumps :: Model283 - Effluent pump, 1/2hp/115V, 25'cord, wide-angle w/plug

$ 355.00

280-Series
1/2 hp Submersible Effluent/Sump Pump

1/2 hp.
1 1/2" Discharge
3/4" Solids Handling

With a shut-off head of 37 feet and 3/4" solids-handling capability, the 280-Series by Liberty covers a wide-range of low-head to mid-range pump applications. Designed for STEP systems, mound systems, liquid waste transfer and high output sump applications, you can count on the 280-Series to offer superior performance. Designed with Liberty's unique one-piece cast iron body and quick-disconnect cords available in 10' and 25' lengths. 35' and 50' cords available on some models. See literature for specifics. High-output 1/2 hp submersible with rugged cast iron housing.

Liberty Pumps :: Starter Kit for Liberty Pump LSG202M-C

$ 55.00

Starter Kit for Liberty Pump LSG202M-C

(1) Start Capacitor

(1) Run Capacitor

(1) Start Relay