Hydromatic Pump :: Model SW33A1 Submersible Sump/Effluent Pump, 1/3HP,120V, 10' Power Cord (Automatic)

$ 254.20

KEY FEATURES:

  • Carbon-Ceramic Mechanical Shaft Seal
  • Oil-Filled Motor with Automatic Reset Thermal Overload
  • Uses Single-Row Ball Bearing Construction
  • Piggyback Plug for Easy Maintenance and Replacement

 

GENERAL DATA:

MAXIMUM HEAD: S_33: 26 ft. (7.9 m)

MAXIMUM CAPACITY: S_33: 48 GPM (3.0 LPS)

FLOW at 10' LIFT: S_33: 40 GPM

MAXIMUM LIQUID: 140°F

PHASE: 1

NEC CODE: 0

SERVICE FACTOR:1

MINIMUM SUMP DIAMETER: S_33: 18" (457.2 mm)

DISCHARGE PIPE SIZE: 1-1/2" NPT

MAXIMUM SOLIDS HANDLING SIZE: S_33: 3/8" (9.5mm)

FULL LOAD AMPS: 10.0

AMP DRAW (full load): S_33: 10 AMPS

DISCHARGE SIZE: 1 ½” NPT

SOLIDS SIZE: ½”

 

CONSTRUCTION/MATERIAL DATA:

MOTOR HOUSING: CAST IRON

CASING: CAST IRON

IMPELLER: THERMOPLASTIC

MOTOR SHAFT: STEEL

HARDWARE: STAINLESS STEEL

“O” RINGS: BUNA-N

MECHANICAL SEALS STANDARD: CARBON / CERAMIC

UPPER BEARING: N/A

LOWER BEARING: SINGLE ROW-BALL

PAINT: PAINTED DARK GREEN, WATER REDUCIBLE ENAMEL, ONE COAT, AIR DRIED.

 

ELECTRICAL/MOTOR DATA:

HORSEPOWER: 1/3

VOLTAGE:115

CABLE LENGTH: 10’ STANDARD 20’ OPTIONAL

R.P.M.: 1550

MOTOR TYPE: SHADED POLE WITH THERMAL OVERLOAD, OIL FILLED

MOTOR PROTECTION: AUTOMATIC RESET / OVERLOAD PROTECTED

SWITCH TYPE: AVAILABLE WITH WIDE-ANGLE TETHERED

POWER CORD TYPE: SJTW

Quantity: