Hydromatic Pump :: Model SK50A1 Submersible Sewage Pump 1/2HP 115V 1PH Automatic 20' Cord

$ 601.00

 KEY FEATURES:

  • Carbon/Ceramic Type 21 Shaft Seal
  • Oil-Filled Motor with Automatic Reset Thermal Overload for Maximum Protection (single phase models)
  • Upper and Lower Single Row Ball Bearing Construction
  • Piggyback Plug Available for Easy Maintenance and Switch Replacement
  • Submersible, Two-Vane, Semi-Open Cast Iron Impeller

 

GENERAL DATA:

MINIMUM SUMP DIAMETER: SIMPLEX: 18" / DUPLEX: 30"

DISCHARGE PIPE SIZE: 2" NPT (3" NPT optional)

MAXIMUM SOLIDS HANDLING SIZE: 2"

MAXIMUM LIQUID TEMPERATURE: 130 Degrees F (54 Degrees C)

MOTOR: SPLIT PHASE WITH THERMAL OVERLOAD PROTECTION

RPM: 1750

FULL LOAD AMPS: 12.0

SHIPPING WEIGHT: 58.0 LBS

SHIPPING DIMENSIONS: LENGTH: 14 In / WIDTH: 12 In / HEIGHT: 17 In

 

CONSTRUCTION/MATERIAL DATA:

BODY CONSTRUCTION: CLASS 30 CAST IRON

MAXIMUM HEAD: SKHS200: 75 ft. (22.9 m)

MAXIMUM CAPACITY: SKHS200: 175 GPM (11.0 LPS)

FLOW at 10' LIFT: 10' OF HEAD IS BELOW RECOMMENDED HEAD FOR THIS SERIES

IMPELLER CONSTRUCTION: CLASS 30 CAST IRON

 

ELECTRICAL/MOTOR DATA:

HORSEPOWER: AVAILABLE IN 1/2, 1, 1-1/2, AND 2 HP

SWITCH TYPE: WIDE-ANGLE TETHERED FLOAT SWITCH OR MANUAL OPERATION (MODEL DEPENDENT)

AMP DRAW (full load): MODEL AND VOLTAGE DEPENDENT - SEE SPEC SHEET FOR DETAILS

CORD LENGTH: 10' SJTW (20' OPTIONAL)

VOLTAGE: 115v or 230v in 1- or 3-PHASE (MODEL DEPENDENT)

 

 

 

Quantity: