Hydromatic Pump :: Model SHEF50A1 Submersible Effluent Pump 1/2HP 115V 1PH Automatic 20' Cord

$ 874.00

 KEY FEATURES:

  • Carbon/Ceramic Type 21 Mechanical Shaft Seal
  • Oil-Filled Motor With Automatic Reset Thermal Overload (single-phase models)
  • Upper & Lower Ball-Bearing Construction
  • Piggyback Plug Available for Easy Maintenance and Switch Replacement
  • Capacitor Start for Increased Starting Torque (single phase models)
  •  

     

    GENERAL DATA:

    MINIMUM SUMP DIAMETER: 24" FOR SIMPLEX / 30" FOR DUPLEX

    MAXIMUM HEAD: 63'

    DISCHARGE PIPE SIZE: 1.5" NPT

    MAXIMUM SOLIDS HANDLING SIZE: 3/4"

    MAXIMUM LIQUID TEMPERATURE: 120°F

    PHASE: 1-PHASE

    RPM: 1550

    FULL LOAD AMP DRAW: 14.5 AMPS ON 115V

    MOTOR: 1/2 HP WITH START CAPACITOR (SINGLE PHASE)

    MAXIMUM (intermittent) LIQUID TEMPERATURE: 140 degrees F (60 degrees C)

    AMP DRAW (full load): 12.0

    DISCHARGE SIZE: 2" NPT

    MAXIMUM CAPACITY: up to 64 GPM

    SHIPPING WEIGHT: 33.0 LBS

    SHIPPING DIMENSIONS: LENGTH: 12 In / WIDTH: 8 In / HEIGHT: 13 In

     

    CONSTRUCTION/MATERIAL DATA:

    FLOAT SWITCH: WIDE-ANGLE TETHERED STYLE

    BODY CONSTRUCTION: CLASS 30 CAST IRON

    IMPELLER MATERIAL: THERMOPLASTIC

    IMPELLER CONSTRUCTION: TWO VANE SEMI-OPEN,THERMOPLASTIC

     

    ELECTRICAL/MOTOR DATA:

    POWER CORD: 20' SJTW

    HORSEPOWER: 0.5 HP

    VOLTAGE: AVAILABLE IN 115V

    CORD LENGTH: 20'; TYPE SJTW

    MOTOR: SHADED POLE WITH THERMAL OVERLOAD, OIL FILLED

    Quantity: